Hi,To attach a host to the Nexus1000v you either can migrate the vmnic0 to the DVS or add a new vmnic to the DVS.To do that :1. You need to make sure the cisco vib package is installed properly on the ESX server.2. You need to go to the networking ->...
Hi,Could you post the error with the esxupdate.Just in case you missed somethingSteps to install :1. Connect to the ESX host - run cat /proc/version ...2. Note the ESX version number.3. Connect to the VSM IP via browser4. Download the specific VEM wh...
Hi,Do you mean to add the physical NICs part of the VEM ?If so :I hope you have configured the Port Profiles for these Nics for upstream switch connectivity.On VCSelect the VEM ESX host and then select the networking tab -> select the switch on the l...
Hi,Nexus 1K does not support Spanning Tree Protocol. The 2nd port which you added should be part of the port-channel.The Spanning tree information below is that from N1K ? AFAIK we dont have this option.The Port-channel if connected to the same Upst...