About Fellmerex3

Fellmerex3 · 07-21-2017

Hello all ! I have microsoft NLB cluster configured in multicast mode.I have a VSS with two 4500x, 2 stacks of 2xCisco 2960x (2 nodes, LACP) are connected to it.After setting up the VSS, he noticed that the user's mailbox did not open the mail, on a ...

Fellmerex3 · 09-22-2016

Hello, please help me. I cant enable routing on Cisco 4500x. I add static route of last resort and other static route and type ip routing in configuration mode. But I cant see string ip routing in running config. ip route 0.0.0.0 0.0.0.0 10.XX.YY.ZZ...

Fellmerex3 · 12-14-2015

Good afternoon !Tell me , what may be related to the permanent load of the processor ( sometimes all 4 cores to 70 % ) and great pings to the neighboring switches located at a distance of 2 meter patch cord . They may be from 10 ms to 40 at random in...

Fellmerex3 · 11-13-2017

I found the solution myself but forgot to write about it on the forum. The problem was not in the setup of the VSS stack and other hardware, but in the firmware bug Version 03.09.02.E RELEASE SOFTWARE (fc4). Link to bug : https://bst.cloudapps.cisco....

Fellmerex3 · 07-22-2017

Hi Reza, yes i can. Now all VSS stack nodes is powered up, but i only plug cables going from Cisco 2960x Stacks to 4500x VSS active node. All cables unplugged from standby node, without test 2960x. From it I check the availability of NLB address. sh...

Fellmerex3 · 07-17-2017

Good afternoon !I ran into the same problem as you. I have a VSS with two 4500x, 2 stacks of Cisco 2960x (2 nodes, LACP) are connected to it.After setting up the VSS, he noticed that the user's mailbox did not open the mail, on a closer look saw that...

Fellmerex3 · 12-12-2016

Hello Richard, I figured out what the problem was, or rather it was not even. Cisco 4500x tuned dugim without connecting to networks, and therefore not visible in the configuration of static routes. Connecting Cisco 4500x network, everything was ok, ...

Member Since	‎12-14-2015 03:42 AM
Date Last Visited	‎08-15-2018 02:19 AM
Posts	8

User Statistics

User Activity

Cisco 4500x in VSS stack and Microsoft NLB

can't enable ip routing on Cisco 4500X

Cisco 3850 High CPU Load and big pings

Re: Cisco 4500x in VSS stack and Microsoft NLB

Hi Reza, yes i can.

Good afternoon !I ran into

Hello Richard, I figured out