Hi all, Could you guys send comments and thoughts in this architectural issue?The positives and negatives of a tiered P-PE-CE architecture versus a P/PE collapsed solution. See attached diagram.(Not commercial :) )- Routers are much more powerful now...
I have a solution with a Cisco 2600 as Tunnel endpoint for users with Cisco secure VPN client 1.1. I'm facing a problem with IP pool: after about 2 months, the ip pool shows no free ip to allocate. I guess that some connections ends and release the a...
Hi, I'm trying to connect a remote office where there is a 26xx router to the central office where resides a VPN5000 concentrator in a private context other than the main CVC.Using LAN-to-LAN conection, a fixed IP address should be used at router sid...
The network I'm designing now is a bit different because I'm the customer.. I mean, this is a tier-2 SP and for P-P and P-PE we are using Ethernet Services from another carrier. I'm already running L3VPNs but now need to add TE+FRR(2 extra labels).So...
I just did the upgrade from 3.1.3a to 3.3.3.First I had to upgrade from 3.1.3a to 3.1.4b using a file from CCO.After I had (and you must have) the CDs of OS 2000.2.3 and when the installation requires you to put the CM CD, start the setup of CM 3.3.2...
Make sure that you have CDs for OS 2000.2.4 if you plan to go straith to CM 3.3.3, I have only CDs of 2000.2.3 and I had to go to CM 3.3.2, after upgrade the OS via CCO file to 2000.2.4 and finally the CM to 3.3.3.
That's what I'm serching now. Some months ago, a TAC engineer told me that I could use Cisco VPN Client with a Router like 1750, 2610, etc as an IPSec gateway. However it'd be in version 12.2 (T). Has already someone tested?Does anybody knows how man...
