About ronwoods

ronwoods · 05-03-2010

Not being too familiar with the ASA, I have everything configured I need and it is working. The problem now is, I am trying to get an additional external IP address working to point to a new server inside our network. In many other firewalls and even...

ronwoods · 01-04-2010

I have setup several PIX firewalls in the past but never had the need to use the new Object-Group configurations. I have a setup that requires me send traffic to multiple internal servers when listening on one of the external IP addresses and using p...

ronwoods · 05-03-2010

Ahh yes, well the hit count on that ACL is showing 0.

ronwoods · 05-03-2010

Okay, one question... I turned on logging and is this how I view hit counts on an ACL or how is that done?Thanks again for all your help!Ron

ronwoods · 05-03-2010

I have tried both of these suggestions, with the same results. Timeout on the outside. I assume these were to be used together and remove the old one which I did correct?

ronwoods · 01-18-2010

I guess this is what I was trying to avoid.... I figured there was a way to do it for each port needed with a static command, but you are saying there is no way to do this using a group command? So we will have to make an entry for each port required...

ronwoods · 01-18-2010

Yes, keeping the existing xxx.xxx.xxx.210 as the default external IP and now using the xxx.xxx.xxx.219 soley for these 3 internal IP's using the port ranges as we discussed in earlier posts...object-group service PORTS_150 tcpport-object range 5080 5...

Member Since	‎01-04-2010 01:09 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12

User Statistics

User Activity

ASA 5510 secondary IP on outside

Pix and port range/Object-Group configuration...

Re: ASA 5510 secondary IP on outside

Re: ASA 5510 secondary IP on outside

Re: ASA 5510 secondary IP on outside

Re: Pix and port range/Object-Group configuration...

Re: Pix and port range/Object-Group configuration...