About Hai Dao Tuan

Hai Dao Tuan · 04-11-2023

Hi AllThis time, some of my company's access lines are not stable, so I want to check ping to some my partner tunnel IPs with big size.I know the basic syntax of ping by tclsh, but my situation is my router (ISR 4431 IOS-XE) tunnels belong to some VR...

Hai Dao Tuan · 10-04-2020

Hi All Please support and advice for my company's issue.We have ordered 1 Cisco Router (ISR4321-V/K9 with SL-4320-UC-K9 and 32x CME-UL) and 29 SIP 7821.But after I finished configuration, no IP phone 7821 could register to CME on ISR4321.1. IOS of IS...

Hai Dao Tuan · 02-17-2019

Hi AllPlease advice how to change setting of MAC OS or router if necessaryMy company is using Cisco ASR1001-x with IOS: asr1001x-universalk9.16.07.02.SPA.bin.Due to ASR1001-X doesn't support SSL VPN so I did configure FlexVPN IKEv2. I am following th...

Hai Dao Tuan · 02-19-2017

Hi all Last year our company bought 1x 4503-E with Sup8E. This year we will buy 1 more for redundancy and use VSS to connect between 2 SWs. We want to reduce the cost, so we want to buy Sup7E or 8L-E. So I wonder if either Sup7E/Sup8L-E can do VSS wi...

Hai Dao Tuan · 02-08-2017

Hi All My office have bought 3 AP AIR-AP1852E-S-K9. I did configure AP1 to mode: AP & Controller with ME controller IP 10.155.241.5 - AP1 10.155.241.6 AP2 and AP3 to mode : AP only with AP2: 10.155.241.7, AP3: 10.51.241.8 In LAN, we only use stati...

Hai Dao Tuan · 04-12-2023

thanks @Dan Frey for the "proc" advice

Hai Dao Tuan · 04-12-2023

We cannot use IP SLA, because some my MPLS access-lines to our partners are only 1Mbps, so if ping with big size (1400 bytes) by SLA frequently it might affect to the traffic or if SLA run during business hours the result also be affected by other tr...

Hai Dao Tuan · 04-12-2023

Hi @balaji.bandi My model is 1001X with v16.9.08. And you can see in the photo, if the number members of list is different, the router cannot run all IPs in list

Hai Dao Tuan · 04-12-2023

Thanks @balaji.bandi Actually I did try using list by 2 cases:1st test: as your guidance: it only works if all lists have the same numbers of IP. If IPA, B, C have different numbers of IP in list, tclsh script cannot work2nd test: using format like t...

Hai Dao Tuan · 04-11-2023

Thanks @balaji.bandi for reply.For tclsh script to ping multiple IPs in 1 vrf I already know (even repeate and other ping parameter). This case I need 1 tclsh to ping IPs from multiple vrf. If you know, please give me the example.

Member Since	‎07-03-2012 02:29 AM
Date Last Visited	‎04-19-2023 09:09 PM
Posts	38
Total Helpful Votes Received	13

User Statistics

User Activity

Need support tclsh script to ping IPs from multiple vrf

Cisco SIP phone 7821 not register to Cisco ISR4321

Anyconnect on MacOS (Ikev2 IPsec) to Cisco ASR1001-x connected by cannot access any hosts on remote side

VSS from 4500-E Sup8-E to other SUP as 4500-E Sup7-E / Sup8L-E

Cisco 1852E Mobility Express APs auto switch from static IP to DHCP

Re: Need support tclsh script to ping IPs from multiple vrf

Re: Need support tclsh script to ping IPs from multiple vrf

Re: Need support tclsh script to ping IPs from multiple vrf

Re: Need support tclsh script to ping IPs from multiple vrf

Re: Need support tclsh script to ping IPs from multiple vrf