Hi all,I have a Cisco ASA (8.2) setup with remote access for my users using Cisco VPN client. The authentication is passed off to my ACS 5.3 which then checks with AD. What I've done so far is create Access Policy rule where I define specifically the...

Is the process the same as with any IOS upgrade? Upload image to both SUPs. Reboot secondary and see if it comes up stable. Force failover after. Running redundant SUP720s on a 6509-E.

Hi all,I'm trying to redistribute the statics the ASA injects using reverse-routing and its not doing it. It will redistribute static routes I add in there but not the ones injected via RRI. Here is the config I am using.ip local pool VPNPool172.20.1...

Please reference the attached diagram. Remote Site is currently connected to Site A and Site B via GRE/ipsec tunneling running EIGRP. Site A and Site B WAN side are connected to MPLS and both exchange bgp route. On the CE routers in each site BGP and...

Hey all,OSPF question. My core switch sees Router A and Router B as DROTHERS and is learning say 10.10.10.0/24 from both. How do I force it to prefer one path wthout impacting any other route it learns?