I have set up 3750s connecting to 6509s with IPT before & usually Dot1q trunk to the 3750 with the 6509 as a VTP server & the 3750s are VTP clients. Then on the 3750 ports, use the following: switchport access vlan 10 switchport voice vlan 910Here's...

You should find what you need here:http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a0080347975.htmlThere are four subsections under "Configuring Multiple Privilege Levels". Without a AAA solution, you ...

Agreed, 400k is terrible. Do you have significant errors on any of the links? Did you verify that your ISP has four equal-cost routes to your router? They definitely need four routes for your /24. Do you see bidirectional traffic on each interfac...

Hi, I have some questions:How are your default routes set up ...and those of your ISP? Just post your config (less passwords) if you want.Are you running BGP with the provider?Additionally, you can try something MRTG-ish to see what is really traver...

If you are going to use a reflector, I would strongly suggest that you static your BGP router ID(s). You don't want your reflector to re-elect its router ID by interface-IP and choose a different one.