We have a Catalyst 600 with the following routing configuration:#sh ip route connect C 192.168.1.0/24 is directly connected, Vlan3 134.0.0.0/16 is variably subnetted, 90 subnets, 3 masks C 13...
We have a Catalyst 6000 which have 3 vlans setup.Current configuration is Vlan 1 can route to Vlan 3 or vis versa. My question is can I restrict certain IP address on Vlan 1 to route to Vlan 3 or certain IP address on Vlan 3 to Valn 1. Thanks
I'm not a Cisco guy, but I found more info which may help:router eigrp 10 redistribute connected network 10.0.0.0 network 134.0.0.0 network 192.168.1.0 no auto-summary
Could you please provide a example how to allow IP and IPX traffice between IP address 10.10.0.50 in Vlan 1 and IP address range 192.168.*.* in Vlan 3. Thanks.