Dear all,We have two Nexus 5548UP (5.2(1)N1(9)) vPC connected in Dual-Homed Fabric-Extender B22HP (4 SFP cable from B22HP, two in each N5k switch) . In first N5k vPC switch everything works fine, but in secondd N5k switch the FEX status is Offline F...
Dear all,Want to order two WS-C3750X-24T-S with service modules C3KX-SM-10G in order to implement MACSec between two datacenters using dark fiber (one fiber). Distance between datacenters is about 17 Km.Can I use GLC-EX-SMD module on both location?Th...
Hello all,I can say I'm relatively new in storage and fcoe. I have installed two 5548UP ( version 5.2(1)N1(6) ) and two B22HP FEX using EvPC. I'm using this guide for configuration http://www.cisco.com/c/en/us/products/collateral/switches/nexus-b22-b...
Hello,Just to inform that the issue has been solved by changing the cables. This article was very helpful to me also: http://mycciedatacenter.blogspot.com/2013/06/fex-identity-mismatch-identity-mismatch.html,prho-nexsw-01# show interface fex-fabric ...
Hi Mark, I have almost similar config in my devices. Down you can find configs of both N5k's.Config on first N5k (working fex):nexsw-01# sh run int eth 1/7 - 8!Command: show running-config interface Ethernet1/7-8!Time: Wed Sep 30 17:17:07 2015version...
Hi Mark,Thanks for your response,This is new installation.Output of show fex from first N5k:nexsw-01# show fex 103 detailFEX: 103 Description: FEX0103 state: Online FEX version: 5.2(1)N1(9) [Switch version: 5.2(1)N1(9)] FEX Interim version: 5.2(1...
Hi Marvin,Thanks for the response,Actually I'm little bit confused because ISP fiber engineer explain to me that since there is single fiber optic between two datacenters he suggest me to use GLC-BX40-D-I in one side and GLC-BX40-U-I in other side. T...
Hi,Thanks for reply,On Brocade side we can see only wwn's of fiber channel ports on N5K switch. We cannot see wwn's of blade servers connected to FEX. Can it be license problem?Thanks
