I am working with 2 3560 POE switches that have watchguard AP's attached. I am attempting to separate 2 SSID's by use of vlans. I have setup vlans 10 and 21 and i need to tag traffic from vlan 21. I understand that I have to use "private vlans" to ac...
Hi everyone, Kind of a noob so go slow. I am trying to configure a PTP with 2 1841's ver 12.4 and I can't tell if my config is the issue or the ISP. I am bonding 2 t-1's with serial interfaces. Any help is appreciated.Router1:mmi polling-interva...
Maybe I can clarify this some more. vlan 21 private-vlan isolated - removed thisI am trying to pass over the same physical port, tagged traffic for Vlan 21 and untagged traffic for Vlan 10. Currently only VLAN 10 traffic is being passed and no VLAN ...
Maybe something was lost in the translation? I don't understand what you trying to say. I am trying to see if I correctly setup the vlans to be tagged and I am looking for an explanation as to why vlan 21 is staying administratively down.
The config of the AP's was checked by watchguard and the vlans were pushed out from the main router when every thing was on the vlan 1. Shortly after the config was pushed everything associated with vlan 21 stopped. The watchguard tech suggested it w...
I made the changes you suggested and it is working. Thanks here are the configs.Router1:mmi polling-interval 60no mmi auto-configureno mmi pvcmmi snmp-timeout 180ip subnet-zeroip cef!!!!no ip domain lookupip domain name dm1.com!username !!!!interface...