Is there any PPPoA support in the ASR100X series at the moment?If i use the feature navigator it isn't listed but it's mentioned at http://www.builtforbroadband.net/en/US/docs/routers/asr1000/install/guide/chassis/asr1_ov1.htmlRegards,Erik
Ok, just got word from our Cisco account manager, PPPoA is NOT supported at this moment, it is on the roadmap but it's unknown where is it on the roadmap (as usual ;))My guess it's on the back of the roadmap at best :/
erhm? if it only supports INPUT policy, your output is input on the other switch, so configuring both switches with an input policy is effectivly the same...
This config is on the trunk port, thereby limiting the traffic in VLAN 1 between the two switches...However, if the 3750 won't do l2 policing it won't work :)
On the 4500 series we use vlan-range for this,conf tqos aggregate-policer 10MB 10 mbps 1250000 byte conform-action transmit exceed-action droppolicy-map 10MB class class-default police aggregate 10MBinterface GigabitEthernet1/1 switchport trunk enca...
