Hi there,I was going to copy and change the default template for 7940 but it is missing. I have tried to copy and change the 7960 template so I could use it with 7940 but it never appears as an option on the configuration page for the 7940 phones. I...
Hi there,For some reason the CLID of the IP phones is sent over to the PSTN but with the information that presentation of the number is prohibited.How can I change that ?Thanks in advance,Vidir
Hi,I have four 7910 phone and each of them has a private number (phone number). Now I want to add one main number to the CallManager (I only have four phones). How can I make all of them ring when someone phones the main number. 7910 has only one ...
Hi there,we have been trying to set up AAA using our AS5300 and the Cisco Secure ACS to handle who may call international calls and who may not. As our customers are using phones to connect and make international calls we have to use their caller id...
Nortel made a patch for our PSTN provider because of the empty 'Presentation bit' parameter. After they installed it I had to use the translation rule that you shared with us.Now everthing is working great.Thank you so much :-)
We are running IOS Version 12.1(5)T4 on our AS5300GW2#sh debISDN: ISDN events debugging is on ISDN Q921 packets debugging is on ISDN Q931 packets debugging is on ISDN events debug DSLs. (On/Off/No DSL:1/0/-) DSL 0 --> 7 1 1 - - - - - - ISDN Q...
We have the same problem. CCM 3.0(9), AS5300 Gatway with PRI connection to the PSTN. The Gateway is configured as H.323 gateway and the presentation bit is set to "allowed". The PSTN people tell us that the parameter they get from us and tells them...