About radutily1

radutily1 · 10-22-2008

Hello guys,I've got a problem while building VPN tunnel between cisco 1841 router and ASA 5510. The vpn tunnel is coming up only from firewall side. Equipment is configured as described in this instruction: http://www.cisco.com/en/US/products/hw/vpnd...

radutily1 · 08-21-2008

We use 10.x.x.x network internally. Pix stands between two networks - 10.34.12.0/24 - outside one with security level 0 and 10.34.3.0/24 - inside one with security level 100. I need all ip's from 10.34.3.0 and 10.34.12.0 networks to pass trough firew...

radutily1 · 10-23-2008

Hello,The configs are just the same as in the example. See attachment.Thanks!

radutily1 · 08-25-2008

Hi Guys. These configuration rows with disabled proxy arp resolved my problem.

radutily1 · 08-22-2008

Right this one should work with disabled proxy arp:static (inside,outside) 10.0.0.0 10.0.0.0 netmask 255.0.0.0 static (outside,inside) 10.0.0.0 10.0.0.0 netmask 255.0.0.0 sysopt noproxyarp outsidesysopt noproxyarp insideGuys from that site have alrea...

radutily1 · 08-22-2008

Yeah right, this could help but in that case firewall will do proxy arp featute that way it can crash these two networks. It may be a good point to use these static with proxy arp disabled on interfaces, but what to do with other 10.x.x.x networks ?

radutily1 · 08-22-2008

Hi Andrew,Inside subnet is 10.34.3.0/24Outside subnet is 10.34.12.0/24The default route on inside - it's simple a default route to another subnets in our network.

Member Since	‎08-21-2008 11:37 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9

User Statistics

User Activity

ASA to router VPN building

Pix 506E 6.3(3)need to pass networks without nat translation.

Re: ASA to router VPN building

Re: Pix 506E 6.3(3)need to pass networks without nat translation

Re: Pix 506E 6.3(3)need to pass networks without nat translation

Re: Pix 506E 6.3(3)need to pass networks without nat translation

Re: Pix 506E 6.3(3)need to pass networks without nat translation