I am looking to get some layer 3 switches that I can use with the ASA5550 Firewall to do some Sub Vlan Interfaces to switches in the racks[Router] |[ASA55400] ------------[3560G] ------------[2650G] Rack 1 (vlan 1,2,3,4,5) ...
I just received my replacment ASA5550 firewalls from Cisco and they onlt have an IOS loaded on DISK0: (723-K8.bin)I want to load the latest IOS (8.22-K8) and ASDM (asdm-631.bin) on DISK0:I configured the port GI0/2 with an IP (192.168.4.1)I am usin...
We are going through a tech refresh and need to retire several 2950's (10/100) switches, We need to go to a 10/100/1000 switch that has layer 2 capabilities. We are also upgrading our firewalls to ASA 5550 so we are using Sub interfaces (VLANS) our d...
I have several Secure Computing Sidewinder G2 Firewalls that we are replacing with ASA 5540's Is there a tool that can convert the configs?Anything even user supported, This is turning into a year long task.
Forget it, I used the External Flash card to install the files , then set the BOOT to Boot System disk0:/asa822-k8.binand set the ASDM to asdm image disk0:/asdm-631.binand all works now. I am not sure why I could not ping the TFTP Server from inside ...
192.168.4.51 00-15-C5-37-24-93 (My Laptop)Sh ARP -- ITVI 192.168.4.51 0015.c537.2493192.168.4.1 00-19-B9-E8-E9-31 (Firewall port)No firewall on the Laptop. and I can't Ping the Server from the ASA.See Attachment for screen shot of TFTP Config
interface GigabitEthernet0/2nameif ITVIsecurity-level 100ip address 192.168.4.1 255.255.255.0Interface GigabitEthernet0/2 "ITVI", is up, line protocol is up Hardware is i82546GB rev03, BW 1000 Mbps Auto-Duplex, Auto-Speed MAC address 0...