About leam_hall

leam_hall · 04-27-2011

Morning all!I have some switches that we tested in StackWise configuration, now they have some interface sets at g1/0/x and some at g2/0/x. I'd like to standardize them all at g1/0/x, and eliminate references to "Switch 2" so that everything not Stac...

leam_hall · 03-07-2011

Morning all!We're looking to add some redundancy for a few of our larger hosts and I'd like to trunk two ports for one of our devices. The question is, if I have a StackWise connected pair of 3750's, can I trunk one port in Switch A with one port in ...

leam_hall · 01-18-2011

Morning all! I need to verify that the IOS image we are running is using SHA-256 or higher. How do I do that?Thanks!Leam

leam_hall · 11-15-2010

Anyone seen an issue where doing a "show run" pegs the CPU on a switch that's in StackWise? We have a 6x 3750 stack running 12.2(55)SE and when we do show run the CPU goes to 95% or higher. Often SSH will be at 50-70% of the CPU. A 2x 3750 stack runn...

leam_hall · 10-13-2010

Hey all,Is it possible to use SNMP v3 to monitor Port Rx/Tx usage and switch CPU usage? We have 3750s and can't use Netflow.Thanks!Leam

leam_hall · 04-27-2011

Correct, the switches are no longer stacked. I needed to test their stackwise ports before putting them on the production floor and they have the configuration from that test. I'd like to put all the non-stacked switches as g1/0/X so we can automate ...

leam_hall · 01-20-2011

Wen, thanks!Is there an expected time SHA-2 will get to the 12.2 line? I can't see the "partner" website you sent, we're only on a customer support level.Leam

leam_hall · 01-20-2011

I don't seem to have that capability. We are using 12.2.(53) (IPSERVICESK9-M) and 12.2(55).Still looking...Leam

leam_hall · 01-18-2011

How do I tell? Is there an IOS command to show? Can it be configured? If there's an option for SHA-1 or SHA-256, how do I make sure I'm only using the latter.Thanks!Leam

leam_hall · 11-19-2010

We are having a similar issue on a 3750 stack. Oddly, after looking at the queues and turning off console logging, things seem to have quieted down. This is not a "cosmetic bug", as far as I can tell; we were having throughput and backup failure erro...

Member Since	‎06-17-2010 09:28 AM
Date Last Visited	‎10-09-2017 12:34 PM
Posts	11

User Statistics

User Activity

Renaming Interfaces?

Can you trunk two ports on two different switches in the same StackWise stack?

How to tell what SHA-X version the IOS is using?

StackWise problem with CPU load and SSH?

3750 -- SNMP Monitor Port usage and CPU History?

Re: Renaming Interfaces?

Re: How to tell what SHA-X version the IOS is using?

Re: How to tell what SHA-X version the IOS is using?

Re: How to tell what SHA-X version the IOS is using?

Re: Catalyst 2960S problem