About ajsouthard

ajsouthard · 10-07-2010

Does anyone know how to set up a qos policy that can classify based on whether an incoming frame is 802.1q (single tagged) or 802.1ad (double tagged) on an ME3400E?

ajsouthard · 10-12-2007

Should I be concerned and how can I stop this ?See attachmentThanks

ajsouthard · 11-09-2005

I have a unicast IP flow (no L2 or L3 multicast or broadcast) running between a source device connected to an "access" port in vlan 21 and a destination device connected to an "access" port in vlan 1. Routing between the vlans happens on an external ...

ajsouthard · 10-04-2005

We are running a ping test and the pings are failing. When we "debug ip packet" we see packets from this "255.1.164.106" address that appear to be answering the ping that is failing. Has anyone seen this before ? Where could these packets be coming f...

ajsouthard · 06-29-2005

I am seeing input queue drops as follows...Input queue: 0/2000/645675/0 (size/max/drops/flushes)The drops counter is slowly incrementing but the size counter is always zero. Why are packets being dropped when the queue is empty. I thought the size co...

ajsouthard · 10-20-2010

Thanks a lot for your suggestion.I have played around with this feature and unfortunately it looks like the ingress interface has to be configured as a dot1q tunnel in order for the match inner vlan option to work. We want the interface to be a plain...

ajsouthard · 10-15-2007

No one is running DECNet as far as I know. We certainly do not have any DECNet commands configured anywhere on the router. I wonder why there is not a command of the sort "no service decnet" ?

ajsouthard · 07-02-2005

yes, it is a trunk. This could explain a lot. Thats very good to know, thanks.

ajsouthard · 06-30-2005

Thanks GP.I understand what you're saying but I have entered the command hundreds of times as fast as I can and the size is always zero even though the drops are incrementing.Also we have not entered a "hold queue" command to change the buffer size, ...

ajsouthard · 10-08-2004

Thanks for the reply.FYII tried some more and found this:xxxxxxxxxxxxxx#sh bootBOOT variable = sup-bootflash:s72033-pk9sv-mz.122-18.SXD.bin,1CONFIG_FILE variable does not existBOOTLDR variable =Configuration register is 0x2102Standby is upStandby has...

Member Since	‎07-12-2002 12:19 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	27
Total Helpful Votes Received	4

User Statistics

User Activity

Differentiating between 802.1q and 802.1ad frames

Why do I see DEC MOP packets hitting my CPU ?

why is switch acting like hub

Can anyone explain this packet from 255.1.164.106 ??

Input Queue Drops - please explain

Re: Differentiating between 802.1q and 802.1ad frames

Re: Why do I see DEC MOP packets hitting my CPU ?

Re: Input Queue Drops - please explain

Re: Input Queue Drops - please explain

Re: How do you verify DRAM on redundant Sup720 ?