About cybrgenx

cybrgenx · 11-12-2001

I'm currently migrating all my BRI interfaces to an E1/PRI interface, remote offices currently dial into my 3640 via a bri int to bri int, but for management and troubleshooting purposes I would like to set them up as BRI Interface to PRI Dialer inte...

cybrgenx · 12-09-2001

Ok, I think I may have it...your gateway to the ISP is Ethernet1 207.97.177.2, they have a router attached to yours with the ip address 207.97.177.1.all IP packets destined for the internet needs to be routed via 207.97.177.2 to 207.97.177.1! (ip rou...

cybrgenx · 12-09-2001

this may come thru twice, a hitch in my browser!Ahh. now I understand!to the colo routerleave the "ip route 0.0.0.0 0.0.0.0 207.97.177.1" (that is if it is directly attached to this router as I can't see the interface that it's attached to!)remove "i...

cybrgenx · 12-09-2001

Ahh. now I understand!to the colo routerremove "ip route 207.97.177.129 255.255.255.255 serial1" add "ip route 207.97.177.128 255.255.255.128 Serial1" add "ip route 10.0.0.0 255.255.255.0 Serial1"nothing needs to be done to your office routerthis sho...

cybrgenx · 12-09-2001

firstly I agree with Scott (svermill) remove the "ip route 0.0.0.0 0.0.0.0 207.97.177.1" and "ip route 207.97.177.129 255.255.255.255 Serial1", as this config will only route all ip packets to 207.97.177.1 unless it's 207.97.177.129! and since I see ...

cybrgenx · 11-28-2001

After looking at the history the problem seems like it's with the lotus notes server not with the frame-relay. with you pstn dialup config is it the same config as the LAN config, eg the DNS/WINS settings?and with the routing, does the route to the s...

Member Since	‎11-06-2001 03:04 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	21

User Statistics

User Activity

BRI to PRI basic-net5 with dialer interfaces for recieving calls

Re: IP Route

Re: IP Route

Re: IP Route

Re: IP Route

Re: Network Timeouts with Lotus Notes Attachments