I have exist fiber ether channel on the sup module I want to move this ether channel to different port, but due to some reason the new port channel not coming up .I shut the existing fiber ether channel and un shut the new ether channel port . Please...
Here is my config due to key mismatch not working but i am using right key.Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA3, RELEASE SOFTWARE (fc1)no aaa new-model!dot11 ssid Test vlan 25 authentication open guest-mode w...
I want to block all the traffice after bussiness hours 5:00pm to 8:00am and weekends.Here is my config on my switch time-range no-connectionperiod weekdays 17:00 to 23:59period weekdays 1:00 to 8:00period weekends 1:00 to 23.59ip access-list extende...
I have existing Sonic FW in my company we are moving from sonic FW to ASA 5510 Security plus lice. I have two ISP currently connected to sonic Firewall I am planning to implement Dual ISP configuration on ASA5510.Here is my script:-interface vlan 2 ...
Hi recentely i am facing problem in enterprice pix firewall.its goes up to 95%.what is the average cpu utilisation and maximum utilisation for pix 525 series.
Thanks guys.it's working now .Here is the solution need to remove the POE from the port .interface GigabitEthernet2/38 description Cross-Over to Primary swicth switchport mode trunk switchport nonegotiate power inline never speed 1000 duplex full c...
Dec 21 19:31:04.409 PST: %LINK-3-UPDOWN: Interface GigabitEthernet2/19, changed state to upDec 21 19:31:05.409 PST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/19, changed state to upDec 21 19:31:27.441 PST: %LINK-5-CHANGED: Inte...
Awesome its working now thank you very much Pat. Quick question if I want to do Mac Address based auth dot11 ssid Test vlan 25 authentication open(authentication open mac-address mac_methods) guest-modeand add the mac address to MAC Addresses Au...
