Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

15.1(4)M7 - Cisco Feature Liscneces not showing as Acitve

Hello Guys,

 

We have just purchased two new 2nd IGR 3925 routers which came in apart of the 3925 Voice Budle/w/ PVDM3-64 FL-CME-SRST-25 UC License PAK x2. On top of this we procurded an extra FL-CME, FL-CME-SRST100 X2 and FLM-DME-SRST-25 feature licenses.

 

On the devices; The CME-SRST license is still showing as not activated and still in evaluation mode; I have attempted to accept the end user licesnse agreement by (Router(Config)#license accept end user agreement) and then issusing the show licsense detail CME-SRST however the feature license is still showing as EvailrighttoUse and it states that the Liscense state is still not in Use, EULA not accepted (See below output.)

 

I have attempted issuing a reload; We have not been provided the PAK from the supplier therefore I can not download a licesnse from Cisco manually; Is anyone able to assist? This is the first time I've attempted to enable FL on a cisco router..

 

Index 11 Feature: cme-srst
        Period left: Not Activated
        Period Used: 0  minute  0  second
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
        License Count: 0/0  (In-use/Violation)
        License Priority: None

 

yourname#show license detail cme-srst
Feature: cme-srst                        Period left: 8  weeks 4  days
Index: 1        Feature: cme-srst                          Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: 0/0  (In-use/Violation)
        License Priority: None
        Store Index: 7
        Store Name: Built-In License Storage

 

 

Cheers,

 

Eliot.

 

 

2 REPLIES
New Member

Could anyone assist?

Could anyone assist?

Cisco Employee

Hi Eliotfoye please enter the

Hi Eliotfoye

 

please enter the following commands to activate the license

1. "license accept end user agreement"
 
2. Give in "show version" and check if "UCK9" license is active or not.
 
3. To activate the UCK9 license, give in following command
 
"license boot module module-name  technology-package package-name"
 
4. Give in "sho license detail cme-srst" and check the license state.
 
5. If it still says  'EULA not accepted'.
 
Give in following command
 
2901_Router#config t
2901_Router(config-telephony)#ip source-address 192.168.106.1 port 2000
2901_Router(config-telephony)#max-ephones 42
2901_Router(config-telephony)#max-dn 200
2901_Router(config-telephony)#exit
2901_Router(config)#exit
 
Now check "sho license detail cme-srst"
 
You can refer to following document for more reference.
 
 
Thanks & Regards, Mudit Mathur
60
Views
0
Helpful
2
Replies
CreatePlease login to create content