1. I'm installing a 1751 w/ 12.2(11)T1 and a VIC-2FXS. When i connect a phone on port 0 and dial a number, it places two calls for the same destination using the two ports. I ear the mix of the sound of the two channels and at the remote end people doesn't ear me. This doesn't happen when i use port 1.
2. In a VoIP configuration with multiple remote sites and a gatekeeper, how does the remote site know what are their E164-IDs to send when registring? Does the router assume the "destination-pattern" from all the "dial-peer voice XX pots"?
3. Is there a configuration example of a case study with VoIP, a gatekeeper and several remote sites? The only one i found at cisco was w/ one remote and one gatekeeper.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.