I have been trying to get the right IOS for 1751V and the MFT-E1 card. I have tried all slots (0 and 1 should work) and various software recommended by the Software Advisor: IP-VOICE-PLUS and IP-VOX-PLUS versions 12.2(8)YL, 12.2.(8)YN, 12.2(11)YV. The card is simply not visible with show version. No controller E1 is possible. Is the card dead? Or does no IOS support this combination (contradicting Cisco documentation and the Software Advisor)?
The 1751 does support the MFT-E1 card. THe support was introduced in 12.2.4YB, YB was integrated into the 6th T of 12.2 train so it will be available in 12.2.8T and above. You will need to use the IP VOX PLUS feature set.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...