Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1760 CCME 4.1 FXS problem

Hi,

I'm trying to configure a VIC-2FXS on a Cisco 1760 running 12.4(15)T4 (CME 4.1) with an extention... After trawling the internet and the Cisco website i have found numerous articles referring to STCAPP... Problem is, if i do:

1760-CCME#config t

Enter configuration commands, one per line. End with CNTL/Z.

1760-CCME(config)#st?

stackmaker stacks standby state-machine

i only get the following options... =(

Did i miss something???

Any help would be greatly appreciated...

Thanks...

Regards,

Alan.

3 REPLIES
Cisco Employee

Re: 1760 CCME 4.1 FXS problem

Hello Alan,

Feature Mode for SCCP FXS Ports IOS is not available in the 1760, since this feature was introduces after that series of router went into End-of-Sale. There is therefore no development or introduction of new features for this platform.

These links lists the different platforms on which the feature is available

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_6xe/htfeatmd.html#wp1053143

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1310413

Hope this helps.

Regards,

Michael.

New Member

Re: 1760 CCME 4.1 FXS problem

Hi Michael,

Thanks for that... Are you able to provide any links or config to get an FXS port to act as an extension???

Thanks...

Regards,

Alan.

Hall of Fame Super Gold

Re: 1760 CCME 4.1 FXS problem

FXS works pretty much like an extension, just configure a DP for it. If you need call transfer, search "h.450" here, for recommendation on how to set such script.

Hope this helps, please rate post if it does!

222
Views
0
Helpful
3
Replies