Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

3750 Egress Drop

I'm trying to set on the 3750 to drop on the Egress Q2 which I have mapped COS 4 into, to 60%. I'm looking for validation my configuraiton is correct?

mls qos srr-queue output cos-map queue 1 threshold 3  5
mls qos srr-queue output cos-map queue 2 threshold 1  6 7
mls qos srr-queue output cos-map queue 2 threshold 2  4
mls qos srr-queue output cos-map queue 3 threshold 3  1 2 3
mls qos srr-queue output cos-map queue 4 threshold 3  0

mls qos queue-set output 2 threshold 2 70 60 100 100

!
interface GigabitEthernet1/0/4
switchport trunk encapsulation dot1q
switchport trunk native vlan 202
switchport mode trunk
srr-queue bandwidth share 10 30 40 30
srr-queue bandwidth shape  4  0  0  0
queue-set 2
mls qos trust cos
auto qos voip trust

#show mls qos queue-set 2
Queueset: 2
Queue     :       1       2       3       4
----------------------------------------------
buffers   :      16       6      17      61
threshold1:     149      70      41      42
threshold2:     149      60      68      72
reserved  :     100     100     100     100
maximum   :     149     100     272     242

What other ways can I validate this?

393
Views
0
Helpful
0
Replies
CreatePlease to create content