Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

4402 LAN Controller and Access point switch configuration

In switch, for access point port configuration, it should be access vlan or trunk port, when I configure as trunk port for access point, AP is not getting associated with controller, but when I configure AP with access vlan, AP is get integrated with controller.

Please let me know how to configure AP point switch port as trunk or access port.

2 REPLIES
New Member

Re: 4402 LAN Controller and Access point switch configuration

The LWAP access points are connected to access ports on the switch's configured for native vlan. The actual VLAN connectivity for client devices are connected across the LWAPP tunnels, not through a trunking port on the AP.

Hall of Fame Super Gold

Re: 4402 LAN Controller and Access point switch configuration

AP  < -- > Switch = Access port
WLC < -- > Switch = Trunk

What error messages do you get?  What is your firmware?  What is the configuration of your management interface?  Can you please post the configuration between the switch to the AP and the switch to the WLC?

722
Views
0
Helpful
2
Replies
CrearPor favor para crear contenido