02-23-2007 02:23 AM - edited 03-17-2019 08:57 PM
Hi ALL,
Does 7985 phone support video confrence calls to another 7985 phones or MCU needed?customer do not need MCU and need only 4 7985 phones and making video conference call between them.
if VideoConference supported does it need special configuration? or it is simple as audio conference call.
02-23-2007 07:56 AM
7985s will allow point-to-point video calling. For video conferencing with multiple participants, then an MCU is required.
I did get multipoint conferencing working using a basic built-in MCU with a Tandberg MXP 990 endpoint (H.323 not Skinny).
Please rate useful posts.
03-12-2007 12:51 AM
hi hani,
as soon as this tandberg equipment will be installed with SCCP firmware to register on CallManager it will loose it Software based MCU Conferencing feature where 1+5 parties can be there in a Conference without an External appliance/hardware however in this case for more than one VIDEO call MCU is required..
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide