Re: answer the call as soon as call is landed to MGW
You can use different TCL script to do so.
One script you can use is bacd script.
This script lets you play welcome prompt, then send it to different queue. But instead, you can configure it such a way that, it plays the ringback wave file as welcome prompt, then autometically send call to a queue number, which will be dial-peer destination pattern pointing to you IVR
Also, you can use AA tcl script. This one also playes welcome and ask for extention. But with simple modification, you can send the call to your IVR after playing the ringback as welcome prompt.
All these scripts you can download from CCO and look for documenation.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...