Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ATA -to- ATA PLAR conigs????

I have 2 ATA-188's. I am trying to create a PLAR on my LAN/WAN. I need help with the configs. I have static addresses. I can access the admin via the web browers. I have not been able to get a dial tone on either phone... Not sure what needs to be configured... I was told that I didn't have to have gatekeeper or .......Help!

3 REPLIES
New Member

Re: ATA -to- ATA PLAR conigs????

please check the number in UID0 and UID1. they should have different numbers. either gateway or gatekeeper may work witk ATA. so pls try to insert a number theat you confiugred in your GW/GK in in UID0 and leave the other one blank. if it didn't work pls try to put in other one.

GW itself will not work properly with ATA. You may need Call Manager to control it or gatekeeper.

Hope it helps.

New Member

Re: ATA -to- ATA PLAR conigs????

for testing purposes, is it possible to run a crossover cable between 2 ata 's and have them function (place a call to each other) or is it necessary for another device to function for call setup and tear-down?

New Member

Re: ATA -to- ATA PLAR conigs????

Older ATA-186's don't support PLAR connections. You don't need a gatekeeper, but you may need at least one multiservice router, if you have more than two devices.

149
Views
0
Helpful
3
Replies