Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Auto QoS VoIP and video question

Hi,

I need to install IP Camera on switchs already configured with autoqos voip, my cameras mark dscp value with af41,

Is it sifficient to use mls qos trust dscp on camera interface and port trunk?

Port is currently configured with mls qos trust cos, do I need to change it by mls qos trust dscp cause my camera only mark dscp value?

Best regards

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Auto QoS VoIP and video question

yes, you will have to add the mls qos trust dscp on that port. Or you can use the mls qos trust device (blah) if you are worried about someone else plugging into that port and taking advantage of your network. Hope that helps.

Erik

1 REPLY
New Member

Re: Auto QoS VoIP and video question

yes, you will have to add the mls qos trust dscp on that port. Or you can use the mls qos trust device (blah) if you are worried about someone else plugging into that port and taking advantage of your network. Hope that helps.

Erik

519
Views
0
Helpful
1
Replies