Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Avaya connected to Cisco 3560

hi Guys,

i need help on configuration of a port which is connected to avaya phone. the data vlan is 10 and voice vlan is 20.

how the configuration will look like..

is the port needs to be configured as trunk ?

regards

amit

1 REPLY
Bronze

Re: Avaya connected to Cisco 3560

Amit,

Try the following document from Avaya

http://support.avaya.com/elmodocs2/comm_mgr/r3/IP_GUIDE_3.0.pdf

At a glance I can see that your switchport config will be similar to this below.

!

Interface FastEthernet 0/x

switchport access vlan 10

switchport host

switchport voice vlan 20

spanning-tree portfast

speed 100

duplex full

!

You will also need to add config for QoS.

Hope this helps, if so please rate.

Regards,

Dave

128
Views
0
Helpful
1
Replies
CreatePlease to create content