Call Manager Hardware Upgrade Question on Publications
I am in the process of upgrading to CCM 4.1.3 from 3.3.4. With this software upgrade, I am also upgrading the hardware with a new MCS 7800 series server. So what I have done is install my current running version on the new hardware and restored CCM with BARS in a test environment. I installed and configured 2 7900 series phones to verify operation of internal calling and db operability. All is ok there. My question is regarding publication to subscriber servers. On my production server, I have 4 subscriber servers pulling for replication. When I check my test box, the subscribers are not listed in the publication. During off hours, I plan to remove production box and install new test server to verify functionality. Will I have to recreate the subscriber servers or will they populate once the server is online with access to network. Also, if there were changes made that the subscriber servers received from production publisher, Will they be overwritten by the 1 week old version on new publisher or will publisher see the changes and be updated from subscriber servers?
Re: Call Manager Hardware Upgrade Question on Publications
For security purposes, the Microsoft SQL server System Administrator (sa) password has been changed on the publisher during an upgrade. After that, upgrading the subscriber to the same version of Cisco CallManager fails.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...