cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
200
Views
0
Helpful
1
Replies

Caller ID problem between 2 PBX's across Cisco VoiP connection

gary.simpson
Level 1
Level 1

Hi all,

I have two Cisco 2811 Routers connecting 2 Avaya Index PBX's via T1/E1 cards (configured for E1)across a LES 10 circuit. Everything works fine but the problem i have is when phone1 (John) at site A dials phone2 (James) a site B, the incoming number is shown but not the name of the person. When 2 calls are made within a site, the name of the calling party is shown (not the directory number). Can someone please shed some light on if this is possible across the VoiP connection and how i would configure it. I have attached the configs to help.

Thanks in advance,

Gary.

1 Reply 1

aghaznavi
Level 5
Level 5

Ideally there should not be any line code violations on the data T1 at all.

Violations are at the data T1 and the voice T. And they shud be avoided.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: