Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Can't make a call thro the gatekeeper

Dear all,

We have a gatekeeper & 3 gateway router, I do the sample configuration, but we found that we make a few call, just only one call is OK,

the configuration as

the gatekeeper

zone prefix xxx.com 549* gw-priority 10 gw1

zone prefix xxx.com 550* gw-priority 10 gw2

zone prefix xxx.com 500* gw-priority 10 gw3

the gatway

interface FastEthernet0/0

ip address xxx.xxx.xxx.xxx 255.255.255.0

h323-gateway voip interface

h323-gateway voip id xxx.com ipaddr xxx.xxx.xxx.xxx 1718

h323-gateway voip h323-id gw1

h323-gateway voip tech-prefix 1#

dial-peer voice 110 pots

preference 2

destination-pattern 557

port 1/1/1

!

dial-peer voice 500 voip

destination-pattern 5..

dtmf-relay h245-alphanumeric

session target ras

When the call is OK, show gateke call, it is OK,

When the call is faulty, no active call & get the fast busy tone,

Could any one have experience on it,

thanks

KH

1 REPLY
New Member

Re: Can't make a call thro the gatekeeper

if you have the network in topologia type it stars is better to use a single zone in gatekeeper... Gatekeeper was in charge to coordinate the calls between different places....

152
Views
0
Helpful
1
Replies
CreatePlease to create content