Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cannot access menu prompt for IPVC 3515 MCU

Hi!

When I console into IPVC 3515 MCU, I cannot get any menu prompt to reset the box to factory default. Instead, I see lots of error messages on ErrorPath display continuously. Any idea how to fix this?

Here is the output after booting up:

Main application started. Please wait...

Attached TCP/IP interface to motfcc unit 0

Attaching interface lo0...done

Adding 37337 symbols for standalone.

==============================================================================

CPU : MPC7410

VxWorks Version : 5.5

BSP version : 2.24

Created : May 22 2006, 17:15:27

WDB : Not included

Chassis Type : ViaIP

==============================================================================

-> Boot line: motfcc(0,0)rvhost: e=192.168.2.222:FFFFFF00 g=192.168.2.253

ViaIP MPC755_MPC8260.

Memory Size: 256 MBytes.

HW Version:0xc

bspSetRoutingTable: Error in routeAdd.

BSP_EXC: Exception hook added

calling Pre Startup ...

MEMORY OK (address: 0x0 - 0x3000)

calling Main Application ...

==============================================================================

The last MCU config burn operation wrong: WARNING

Retrieved old volume params with %75 confidence:

Volume Parameters: FAT type: FAT16, sectors per cluster 255

255 FAT copies, 0 clusters, 65535 sectors per FAT

Sectors reserved -1, hidden -1, FAT sectors 16711425

Root dir entries -1, sysId (null) , serial number ffffffff

Label:" " ...

Disk with 512 sectors of 512 bytes will be formatted with:

Volume Parameters: FAT type: FAT12, sectors per cluster 1

2 FAT copies, 500 clusters, 2 sectors per FAT

Sectors reserved 1, hidden 0, FAT sectors 4

Root dir entries 112, sysId VXDOS12 , serial number ffffffff

Label:" " ...

************* LOGGER VERSION: 1.24 *************

Initializing RVLogger System...

VxWorks (for ViaIP MPC755_MPC8260) version 5.5.

Kernel: WIND version 2.6.

Made on May 22 2006, 17:15:27.

Boot line:

motfcc(0,0)rvhost: e=192.168.2.222:FFFFFF00 g=192.168.2.253

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.autoRedialInt

erval

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.muteJoiningPa

rticipants

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.unmuteFirstPa

rticipant

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.webCollaborat

ionMinPort

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.webCollaborat

ionMaxPort

ERROR path

MCU.gccFlatConfTemplateTable.1.layouts.1.videoOutputs.1.forcePassword

0x

5 REPLIES
New Member

Re: cannot access menu prompt for IPVC 3515 MCU

hi,

i m also facing the same problem for last 2 days .Please let me know if u got any solution to this.i have cisco 3515 mcu.

I will apriciate if you can help me.

regards,

Kumarjeet Acharya

New Member

Re: cannot access menu prompt for IPVC 3515 MCU

Hi,

Did you finally resolve this issue as I am experiencing the same trouble.

Thanks

Tony

New Member

Re: cannot access menu prompt for IPVC 3515 MCU

Look very carefully for the following line:

Press any Key To start configuration

You have about 2-4 seconds to hit any key and it will bring up the configuration menu on your screen. I can see from your output that you have not attempted to change the IP address, default router address and netmask. This is evidence by the line containing rvhost. HTH

New Member

Re: cannot access menu prompt for IPVC 3515 MCU

Hi,

Thanks for the reply, MCU SW was corrupt reinstalled and it is working fine.

Cheers

New Member

Re: cannot access menu prompt for IPVC 3515 MCU

Hi,

Could you tell me how did you upgrade the corrupted MCU SW? I am traying to upgrade it however the GUI needs SNMP to proceed on upgrade. Not really sure what the default snmp settings are.

Thanks a bunch!

451
Views
0
Helpful
5
Replies
CreatePlease to create content