09-02-2009 10:37 AM - edited 03-17-2019 09:49 PM
I have a problem when configuring the CCM 7.1.2 with ISR 2811 as a MGCP gateway to PSTN.
I got errors on "debug mgcp error"
Sep 2 19:34:27.645: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x485E8038 pkt->mgcp_parm_lines 0x00000000).
What does this mean?
09-03-2009 04:43 AM
Hmm. It's possible you have CUCM configured for fax relay but it didn't make it to the gateway. Try adding:
no mgcp fax t38 inhibit
mgcp default-package fxr
mgcp package fxr
no mgcp
mgcp
Other than that, 'debug mgcp packet' would be more helpful.
What's the actual problem?
-nick
09-03-2009 10:14 AM
Okay it is fixed because I had a wrong hostname in CCM.
By the way, even everything is working, why do I see status/ip address are unknown/unknown in the CCM config page?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide