Greetings, ive been having problems with VT Advantage and not being able to get the video to trigger when the call is answered.
Currently i have two Windows XP Laptops connected to the local network with IP Communicator and VT Advantage Installed.
I have configured both a voice and data vlan on the switch and the phones have been configured to support video both on the ephone and through "Telephony-Service" with the service phone videoCapability 1 command.
The two laptops are connected to a 7970 and 7960 IP Phone through the PC Port and can both detect the presence of the phone through Vt Advantage, i can also place local calls between phones on there internal extension but when i do the video feed isnt triggered.
Could anyone shed any light on what the problem may be?
The VT advantage software when running on the PC needs to communicate with the phone. If the phone load on the phone does not include video support then the VT advantage software will not recognize the phone.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4