Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

CCME and MPE compatibility

If you need to host more than 6 users in and less than 25 users in audio conferences, can the CCME on a 3845 be used with a MCS 7825H2-Rc1 to allow for that number of users?

Community Member

Re: CCME and MPE compatibility

Try with these commands.Router(config)# telephony-service,Router(config-telephony-service)# max-conferences

Hall of Fame Super Red

Re: CCME and MPE compatibility

Hi Tony,

CCME and Meetingplace Express can be integrated, have a look at the following;

Cisco Unified CallManager Express Solution Reference Network Design Guide

Cisco Unified MeetingPlace Express provides integrated voice and Web conferencing and the ability to schedule meetings from a variety of interfaces and to conduct reservationless meetings that are initiated from phones, Web browsers, and Cisco Unified Personal Communicator (Web conferences only). Cisco Unified MeetingPlace Express supports industry-standard protocols-H.323 and SIP-to ensure connectivity with a range of telephony systems, including Cisco Unified Communications Manager and ***Cisco Unified Communications Manager Express*** (video support not available). Cisco Unified MeetingPlace Express VT provides voice, video, and Web conferencing for Cisco Unified Communications Manager environments only. Cisco Unified MeetingPlace Express VT does not provide the ability to schedule meetings or to initiate reservationless conferences. Cisco Unified MeetingPlace Express VT supports only impromptu conferences that are initiated from SCCP endpoints, such as Cisco Unified Video Advantage, and from Cisco Unified Personal Communicator (voice, video, and Web conferencing).

From this doc;

Hope this helps!


CreatePlease to create content