Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ccme installation / ip phone configuration

Hi everybody,

I'm new in voip.I need to install callmanager on a 2621XM or 26111XM router using a c2600-advsecurityk9-mz.123-14.T7.bin.

cme-123-14T5.zip has been uncompressed and copied into the router.

I tried to use telephony-service and ephone commands but the router doesn't recognize it.

Is there else thing to do before using these commands?

please help.

2 REPLIES
Silver

Re: ccme installation / ip phone configuration

This link should help you with the proper steps to get everything running correctly:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_guide_chapter09186a0080527135.html

HTH

Steve

New Member

Re: ccme installation / ip phone configuration

Thanks Steve,

i changed the ios and i can use the command now.

The problem is that when i call, the message "unknown number" appears on the phone screen.

Here are the router, switch config and the output of show ephone, show telep all .

198
Views
0
Helpful
2
Replies
CreatePlease to create content