in order to select the Portuguese locale for the phones, you will need to download the latest locale installer (LI) for your country, i.e. Portugal from cisco.com. If you also need the localised network tones, then you will need to install the combined network locale as well.
For example, for CUCM version 7.1.x, you should download the following locale installers:
Caution: If you are you using 69XX or 89XX IP phones, you will also need the Phone only locales (PO)!
Be sure to install the user locale, as well as the network locale on every CUCM server in your cluster, starting with the Publisher. You will have to reboot the cluster, in order to have the locales fully available.
Please refer to the following DocWiki document, if you need assistance with installing the locales:
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...