Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Change IP Address of PGW2200

Hi everyone!

I am an Junior in PGW 2200 configuration. Do I need to re-install PGW2200 when I change the IP Address of it?

Please give me any ideas?

Thanks

3 REPLIES
Bronze

Re: Change IP Address of PGW2200

The PGW refecence to his own ip address and to the IP address

of the standby PGW are all in the file :

/opt/CiscoMGC/etc/XECfgParm.dat

In this configuration parameters

*.ipAddrLocalA =

*.ipAddrLocalB =

*.ipAddrPeerA =

*.ipAddrPeerB =

*.IP_Addr1 =

*.IP_Addr2 =

*.IP_Addr3 =

*.IP_Addr4 =

So you need to change this file in both the active and the standby PGW.

After the change the PGW application need to be restarted

In addition:

- all the NAS need to change the pointers to the

PGW addresses in they rlm-group configuration section

- all the SLTs need to change the pointer to the PGW IP address in the

"ss7 session" configuration section

After the change the SLTs neeed ot be rebooted.

New Member

Re: Change IP Address of PGW2200

Thank you so much. I will try those.

New Member

Re: Change IP Address of PGW2200

no you dont need to re-install the PGW

just change the following files, to reflect the new IP addresses

/etc/inet/hosts

/etc/hostname.inf_name

/etc/inet/ipnodes

395
Views
0
Helpful
3
Replies