Cisco 2811 voice bundle with VWIC2-1MFT-E1

[shawvoel]

Hi All Expert,

If our PBX system can support PRI interface card, can I used VWIC2-1MFT-E1 as a trunk port which interface with PBX system?

I'm not familiar with VoIP, please advise and thank you.

Rgds,

Au Yeong Shaw Voel

[Brandon Buffin]

Yes you can. Please see the following link for confirmation.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a0080091b9c.html

Hope this helps. If so, please rate the post.

Brandon

[shawvoel]

Hi Brandon,

Do you know where I can get the configuration guide for this?

Rgds,

Au Yeong Shaw Voel

[Brandon Buffin]

The configuration will depend on the type of PBX that you have. Take a look at the Interoperability Portal here:

http://www.cisco.com/warp/public/779/largeent/avvid/inter_operability/

Click Enter the Portal, choose Cisco Toll Bypass Products from the dropdown list and then choose your PBX vendor. A list of related documentation will appear in the window below.

Hope this helps.

Brandon

[shawvoel]

Hi Brandon,

Thank you.