Hi friends I need your help configure Cisco 3745 router which is installed with 2x FXO and 4x FXS ports and have latest 12.4 voice IOS. Both two FXO ports will be connected to BT (UK Telco) as external lines and all four FXS ports will be connected to standard analogue phones as internal extension lines. All internal extensions should communicate each other plus all can have access to external lines by pressing 9. I am looking for your help as step by step configurations also please keep in mind to resolve FXO supervisory disconnection issue specific to BT UK. I will be highly thankful for your kind help.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...