Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco CCM and Tandberg VC Gatekeeper and Gateway

Dear all,

we currently have ccm 4.2.3 running with a 2811 gateway which has 2 pri connection to our local telco.

we also have a Tandberg GK and GW. The Tandberg GW is using one pri interface connected to our local telco. Most of the time we do not use the VC system, so the pri is hardly ever used.

my question is: is there a way to integrate this with each other? e.g. connect the 3 pri from the telco to our 2811 and make a separe pri connection from our 2811 to the Tandberg GW.

regards,

Gerard

  • Video Over IP
3 REPLIES
New Member

Re: Cisco CCM and Tandberg VC Gatekeeper and Gateway

New Member

Re: Cisco CCM and Tandberg VC Gatekeeper and Gateway

the URL link posted is not accessible

New Member

Re: Cisco CCM and Tandberg VC Gatekeeper and Gateway

It is accessible, but you have t log in to CCO.

Try this one, it is available without login: http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00804794c6.shtml

Regards

Wojtek

455
Views
0
Helpful
3
Replies