I created a simple automated attendant based on the predefined Unity call handlers and few call handlers that I created. Every thing is working fine. I noticed that the predefined opening greeting call handler was dedicated for the Unity Voice Mail system. So, if the caller knows the parties extension and dials it, he will reach immediately the Voice Mail, I mean the phone will not ring before. It s happening the same when the caller press the key 4 for directory assistance, and then choosing the destination.
I m wondering what I should change in the default opening greeting to make the phone ringing first ,then if no answer, the call will be forwarded to the voice mail.
For each subscriber make sure the transfer rule is enabled on the "call transfer" page for that user in the SA - by default users are created with this set to "no, send directly to subscribers greeting" set. You can change this on a per user basis in the SA or for everyone using BulkEdit found in the Tools Depot on your desktop. You can also configure your subscriber template(s) you're using to create users to be setup to have this enabled by default.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...