Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Video help

Hello

I need help please , i have a solution for video conference. I have an existing CUCM cluster v9 , and i have a video endpoints (9971 , E20 ,E60). We need to do video conference (ad-hoc conference ) , after my studying i think i can use Cisco MCU unit to do video conference , i need to get answers for the below:-

1-What is the model for Cisco MCU?.

2-How many conference participants can connect to the conference?.

3-I think there is no need for VCS (call control) for my case  , because i donot have 3rd part h323 or telepresence)?.correct.

4-Can i do schedule for meeting by MCU?.

5-Which protocol between MCU and CUCM cluster will be prefered?. Any document for the configuration , please.

Thanks

2 REPLIES

Cisco Video help

The MCU can be registered on CUCM as a conference resource (using SIP)

read this:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_Deployment_guide_1-31.pdf

CUCM wil register E20 and E60 natively.



=============================
Please remember to rate useful posts, by clicking on the stars below. 

=============================

Please remember to rate useful posts, by clicking on the stars below.

VIP Green

Cisco Video help

1-What is the model for Cisco MCU?.

There are many, of different specs and capabilities.  4200 Series, 4500 Series, 4501 Series, 5300 Series, MSE Series.

2-How many conference participants can connect to the conference?.

It depends on the model and licences and number of MCU(s) if you cascade them... you can have thousands.

3-I think there is no need for VCS (call control) for my case  , because i donot have 3rd part h323 or telepresence)?.correct.

4-Can i do schedule for meeting by MCU?.

5-Which protocol between MCU and CUCM cluster will be prefered?. Any document for the configuration , please.

See response in post by Dennis above.

Wayne

--

Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
546
Views
0
Helpful
2
Replies