Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

Cisco Voice Home Lab

Hello,

I was wondering what would be needed to set up a basic Voice lab for home. I have a lab currently of 1 2610, 12 2500's, 1 4000. A 2950 switch, and a Catalyst 5000 switch.

I know I would need atleast two IP Phones, 7960 or 7940's. Would a Cisco 2620 with one FXO and one FXS vic cards be a good gateway? What would I need to run CCM or Cisco CME. Can I run Call Manager express on the 2620?

Any help is appreciated!

Thanks again!!

Scott

3 REPLIES
Silver

Re: Cisco Voice Home Lab

You can run CME on a 2620XM. See the following site for specific platform informaiton for CME version 3.4.

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a008055677f.html

Hope this helps.

Steve

Silver

Re: Cisco Voice Home Lab

Thanks Steve, that helps alot

Scott

New Member

Re: Cisco Voice Home Lab

A non XM 2610 with an IPPLUS IOS image should be able to run ITS or IOS Telephone Services. It isn't CCME but the priciples are the same. I ran ITS on my 2610. Good luck

280
Views
5
Helpful
3
Replies
CreatePlease to create content