Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

classification of IP SLA

Hello peeps!

I'm wondering who would I classify IP SLA packets?

I have ip sla going from 192.168.1.1 to 192.168.1.2

Voice, ftp and streaming are all classified and LLQ in place

But IP SLA fails because of high volume on the serial line

1 REPLY
Super Bronze

Re: classification of IP SLA

Hi

You can do a couple of things:

1) Use the 'tos' command under IP SLA config to set it into the DSCP based classes (example:http://www.ccde-study.com/2008/11/ip-sla-dscp-testing.html)

2) Ensure that your WAN QoS classifications include the IP SLA streams specifically.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
389
Views
0
Helpful
1
Replies