Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME Missed calls number screening

If a call are missed, the missed call number are shown without the leading zeros. For national numbers are one 0 needed and for international numbers are two 0 needed. I do not use any translation rulls at this time. How can i fix this? How the translation rulls are looking if I like to do this so? Any suggestions are welcome.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: CME Missed calls number screening

Use Voice translation rules.

Try adding the following configuration to your CME

voice translation-rule 100

rule 1 /\(.*\)/ /0\1/

voice translation-profile TRANSLATE_CALLING

translate calling 100

dial-peer voice x pots

translation-profile incoming TRANSLATE_CALLING

NB - 'dial-peer voice x pots' should be the pots dial peer that incoming calls arrive on

1 REPLY
Silver

Re: CME Missed calls number screening

Use Voice translation rules.

Try adding the following configuration to your CME

voice translation-rule 100

rule 1 /\(.*\)/ /0\1/

voice translation-profile TRANSLATE_CALLING

translate calling 100

dial-peer voice x pots

translation-profile incoming TRANSLATE_CALLING

NB - 'dial-peer voice x pots' should be the pots dial peer that incoming calls arrive on

158
Views
0
Helpful
1
Replies
CreatePlease to create content