cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
306
Views
0
Helpful
1
Replies

CME Missed calls number screening

If a call are missed, the missed call number are shown without the leading zeros. For national numbers are one 0 needed and for international numbers are two 0 needed. I do not use any translation rulls at this time. How can i fix this? How the translation rulls are looking if I like to do this so? Any suggestions are welcome.

1 Accepted Solution

Accepted Solutions

mchin345
Level 6
Level 6

Use Voice translation rules.

Try adding the following configuration to your CME

voice translation-rule 100

rule 1 /\(.*\)/ /0\1/

voice translation-profile TRANSLATE_CALLING

translate calling 100

dial-peer voice x pots

translation-profile incoming TRANSLATE_CALLING

NB - 'dial-peer voice x pots' should be the pots dial peer that incoming calls arrive on

View solution in original post

1 Reply 1

mchin345
Level 6
Level 6

Use Voice translation rules.

Try adding the following configuration to your CME

voice translation-rule 100

rule 1 /\(.*\)/ /0\1/

voice translation-profile TRANSLATE_CALLING

translate calling 100

dial-peer voice x pots

translation-profile incoming TRANSLATE_CALLING

NB - 'dial-peer voice x pots' should be the pots dial peer that incoming calls arrive on

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: