01-26-2018 05:39 AM - edited 03-18-2019 01:48 PM
Hello,
I would like to send calls to CMS using port 5070 instead of 5061. I have changed my Cisco UCM configuration on the SIP trunk and SIP Trunk security profile to use 5070. However, now the SIP trunk shows not active when using OPTIONS PING.
I have updated my outbound rules for the SIP proxy on CMS to use domain:port with the port being 5070 and i am able to make outbound calls from CMS, however, i cannot send a call to CMS on port 5070. Has anyone ever attempted to change this before?
I see no available options to set this via any API method.
Thanks in advance.
Solved! Go to Solution.
01-26-2018 08:16 PM
01-26-2018 08:16 PM
01-29-2018 05:21 AM
Thank you for the reply. I was hoping to find some flexibility in the product, similar to other products that let you pick the port. I was able to use a domain:port on the SIP proxy for outbound, however, on inbound i cannot make it work on any other port than 5061.
Hopefully this gets road mapped at somepoint
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide