I read on the tcl ivr guide 2.0 that this command existed. I may have to use a c-code. But I can't find more infos.
Thanks for your help
Here is what you can read on the guide:
The command export command lets the Tcl script register or export a Tcl procedure to be invoked from C-code through a dynamic linking mechanism.
command export <command> <command>
?<command>?The expanded name, including namespace information needed to invoke the procedure from outside its native namespace.
?<command>?A parameter template that the Tcl procedure accepts, allowing the DLL system to make sure the C-code that invokes this API calls it with the right type and number of parameters. This string is of the form xMadMadMadMadMad, where each x indicates the type of parameter permitted. The first x indicates the return type of the procedure. The value of x can be s to represent a string or char* parameter.
I don't think you can do that. Linking C code implies compiling your code for the platform used, with the standards used by IOS, and knowledge of the inners of IOS. Unless pure code, you wouldn't be able to call anny standard function.
I think it is an hook left by for exclusive use bu future IOS and features.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...